Why Is The Ring Doorbell Flashing Blue?(+4 Easy Fixes)

The Ring Video Doorbell is a product that connects the user with their doorstep by enabling access to real-time video, doorbell notifications, and intercom features.

How to fix your Ring Doorbell when it flashes blue? Reboot your Wi-Fi router. Simply turn it off by unplugging it from the wall, wait a bit, turn it back on. Move the router closer to the device. Reset the password or free up some bandwidth by disconnecting other devices from the network. Reset Ring. Hold down the orange button(on the back of the device) for 20 seconds.

Despite becoming a favorite since its launch, the product comes with its share of problems that its customers have to deal with. This article will diagnose and solve the blue light flash problem on a Ring Doorbell.

Why Is The Ring Doorbell Flashing Blue?

In this section, we will first uncover the possible reasons which may cause the Ring Doorbell to flash a blue light.

Depending on the model version of the Ring Doorbell, you should be able to find a LED ring light on your Ring Doorbell, either beside or under the device’s camera.

This light will flash or remain static to convey some message to the users.

It is essential to understand what each type of color and flashing sequence means.

A blue light flashing on a Ring Doorbell can mean either of the two things: the device has encountered a problem or going through a process.

Below is a short and precise guide to help you interpret blue light flashing on your Ring Doorbell.

Here is a table of what exactly flashing blue color on your Ring can represent.

Type of flashing blue light What it means
The blue light flashes at one-second intervals The device is either booting or rebooting. In this case, the blue light must be flashing steadily. Steady blue light flashes can occur if the doorbell loses power or undergoes an automatic update.
The blue light flashes and moves up in the ring The device looks for a Wi-Fi connection. The flash should stop once the connection is established.
Four portions of the blue ring light flash four times before a white light The device has completed the initial setup and is ready for use.
The top half of the blue ring blinks Either the entered password is incorrect or the built-in battery is charging. Once the internal battery of the doorbell is fully charged, the device should return to normal.
A quick blue light flashes before a spinning white circle The factory reset has been completed. You should notice a spin rather than a flash.
A solid (static) blue light The two-way audio is in use. Once you stop using your audio, the blue light should return to normal.

We hope this guide helps you determine the reason behind the flashing blue light on your Ring Video Doorbell.

Why Is The Ring Doorbell Flashing Blue On Charge?

More than often, it is normal if the blue light on your Ring Video Doorbell starts flashing as soon as you put the device to charge.

If plugging in the charger triggers flashing, it means that the internal battery of the Ring Doorbell is being charged.

Once the battery is fully charged, the ring lights should go back to normal.

How To Fix Ring Doorbell Flashing Blue?

Now that we have unraveled the potential reasons behind the flashing blue light of the Ring Doorbell, we can proceed towards the possible solutions.

As seen in the previous sections, a Ring Doorbell flashing blue can mean a lot of things.

Depending on the blue light flash, here are some solutions to stop the blue ring light on your device from flashing.

1. Check your internet connection

The Ring Doorbell flashes a blue light when it is trying to connect to an internet connection.

Suppose the flash continues for a usually longer duration.

In that case, it means that the device has not been linked to a wireless internet connection yet.

In such a case, you should check your Wi-Fi router and internet connection.

  • The first step is to test your connection speed.
  • If your internet speed is below than expected, reboot your Wi-Fi router. Simply turn it off, wait a bit, turn it on again.
  • Try changing the location of your router in your home to see if the connection strengthens.
  • You can also reset the password or free up some bandwidth by disconnecting other mobile devices connected to the internet.
  • If neither of these works for you, reach out to your local internet service provider.

2. Resetting the device

Resetting your Ring Video Doorbell can also be an effective solution to fix almost any problem.

We advise you to use this only as your last resort. Here is how you can reset your Ring Video Doorbell.

  1. Unscrew the security screws and pull out the doorbell from the dedicated bracket.
  2. You should notice an orange setup button on the back of the device.
  3. Press and hold that button for at least 10 seconds. This should trigger the light on the front of the doorbell. The light will start flashing and continue to do so for several minutes.
  4. Wait for the reset and reboot to complete.

3. Try triggering some alarm

It is also possible that a bug or glitch is causing the device to blink a blue light.

To address this issue, you should try selecting some alert or alarm on your Ring Video Doorbell.

4. Contact Ring Support

If neither of these works out, the only option you are left with is to reach out to the customer support of Ring LLC.

You can reach out to them using the link https://support.ring.com/hc/en-us.


In this article, we tried to break down the issue of blue light flashes on a Ring Video Doorbell.

We discussed what things may cause the blue ring light on the Ring Doorbell to flash, along with ways to stop it from repeatedly blinking.

The article was focused on making the issue as simple as possible so that any layman could follow it.

We hope that this article addresses your queries and saves you the time you might have spent researching further on the internet.

I’ve been working with technology in one way or the other all my life. After graduating from university, I worked as a sales consultant for Verizon for a few years. Now I am a technical support engineer by day and write articles on my own blog here in my spare time to help others if they have any issues with their devices.